Lucent-technologies Network Access Module Manual de usuario descargar pdf (Pagina 19)

INA Module 1-3

INA Front Panel

Figure 1-1 INA Module Front Panel

DIP Switches. DIP switch 1 controls the configuration of serial port C0. DIP switch 2

controls ComOS boot behavior. See “Set DIP Switches” on page 3-2.

System LED. This LED indicates the status of the routing hardware and the ComOS.

One blink every 5 seconds indicates normal operation. See “System LED” on page 3-5.

C0 Serial Port. This RJ-45 connector is used to connect a PC or terminal to act as a

console. The console is used to access the ComOS command line interface. See “Connect

a Console (Optional)” on page 3-3.

Network Activity LED. This amber LED blinks to indicate network traffic. See

“Ethernet LEDs” on page 3-6.

DS-1 status LEDs

C1 serial port

console port (C0)

Ethernet port (Ether 0)

Reboot button

T1/PRI port

DS-1 test jacks

DIP switches

system LED

network activity LED

Ethernet link LED

1210-001

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 74 75

Sin comentarios

Lucent-technologies Network Access Module Manual de usuario Pagina 19